Arc Spray -
TAFA Models 8830 / 8835 / 9935 / BP400
|
P/N |
CONTACT TIPS (Models 8830 / 8835) |
|
450042 |
Contact tip for 1/16 in. wire |
450043 |
Contact tip for 2 mm wire |
|
450044 |
Contact tip for 1/16 in. aluminum wire |
|
450045 |
Contact tip for 2 mm aluminum wire |
|
450458 |
Extended life contact tip for 1/16 in. wire |
|
450491 |
Extended life contact tip for 1/16 in. aluminum wire |
|
450604 |
Extended life contact tip for 2 mm wire |
|
451193 |
Extended life contact tip for 2 mm aluminum wire |
|
451024 |
Super long life contact tip for 1/16 in. wire |
|
451588 |
Super long life contact tip for 2 mm wire |
|
P/N |
AIR CAPS (models 8830 / 8835) |
|
450031 |
Blue air cap, coarse to medium spray pattern |
450032 |
Gold air cap, medium to fine spray pattern |
|
450033 |
Green air cap, coarse to medium spray pattern |
|
450034 |
Red air cap, extra fine spray pattern |
|
P/N |
Nozzle Positions (models 8830 / 8835) |
|
450027 |
Long slot nozzle positioner, fine spray pattern |
450028 |
Long cross nozzle positioner, fine spray pattern |
|
620023 |
Short slot nozzle positioner, hard wire use |
|
620047 |
Short cross nozzle positioner, hard wire use |
|
P/N |
Other (models 8830 / 8835) |
|
450010 |
Wire driver roller |
450021 |
Contact tube |
|
450024 |
Side cover gasket |
|
450440 |
Control lever bushing |
|
600019 |
Lever, roller opening |
|
600036 |
Guide, wire, short front |
|
600037 |
Guide, wire, long front |
|
600047 |
Arc shield nut |
|
600048 |
Front cover assembly |
|
600138 |
Guide, short rear, QD (for Model 8835 only) |
|
600139 |
Guide, long, rear, QD (for Model 8835 only) |
|
600156 |
Guide, short, rear, QD (for Model 8830 only) |
|
600157 |
Guide, long, rear, QD (for Model 8830 only) |
|
600326 |
Guide, rear, right |
|
600398 |
Alignment housing assembly |
|
610003 |
Control switch assembly |
|
620022 |
Pin, front control |
|
620068 |
Pin, dowel, control lever |
|
620120 |
Modified idler gear (for Model 8835 only) |
|
620151 |
Modified 1/4 in. gear (Model 8835 only) |
|
P/N |
ArcJet® Spray Attachment (models 8830 / 8835) |
|
800152 |
ArcJet retrofit kit |
450448 |
ArcJet plenum housing |
|
450729 |
ArcJet air cap |
|
620074 |
ArcJet nozzle positioner |
|
620075 |
ArcJet front cover assembly |
|
620101 |
ArcJet arc shield nut |
|
P/N |
Spare Parts (model 9935) |
|
451503 |
Worm shaft |
451859 |
Power manifold |
|
451860 |
Top housing |
|
451861 |
Bottom housing |
|
451862 |
Conductor release cover |
|
451865-1 |
Right side terminal clamp |
|
451865-2 |
Left side terminal clamp |
|
600607 |
Coupling barrel, QD |
|
601235 |
Alignment housing assembly |
|
601236 |
Right side cover |
|
601237 |
Left side cover |
|
601238 |
Current tube assembly |
|
610436 |
Control cable |
|
610447 |
Gun volt cable assembly |
|
P/N |
TAFAGlide Wire Delivery System |
|
452085-10 |
TAFAGlide – 10 ft. (two required) |
452085-12 |
TAFAGlide – 12 ft. (two required) |
|
452085-15 |
TAFAGlide – 15 ft. (two required) |
|
P/N |
Spare Parts (model BP400) |
|
05000392 |
Standard wire guide for 1/16 in. wire |
451834 |
Standard wire guide for 2 mm wire |
|
05000391 |
Standard wire guide for 11 GA wire |
|
05007147 |
Extended life wire guide for 1/16 in. wire |
|
05000981 |
HV and fanspray wire guide for 1/16 in. wire |
|
05004992 |
HV and fanspray wire guide for 11 GA wire |
|
01313110 |
Standard hard wire guide (for extension gun) |
|
01313120 |
Standard soft wire guide (for extension gun) |
|
01323110 |
11 GA wire guide for hard wire (for extension gun) |
|
01323120 |
11 GA wire guide for soft wire (for extension gun) |
|
0M053706 |
Drive roll, 14 GA, U-groove, for soft wires |
|
05000628 |
Drive roll, 14 GA, V-groove, for hard wires |
|
0M053704 |
Drive roll, 2 mm, V-grooves, for soft wires |
|
0M079610 |
Drive roll, 2 mm, V-grooves, for hard wires |
|
05000346 |
Drive roll, 11 GA, U-groove, for soft wires |
|
0M132961 |
Drive roll, 11 GA, V-groove, for hard wires |
|
05000019A |
Standard air cap, 2 mm, 11 GA, 14 GA |
|
05006194 |
Air cap shield |
|
02509100 |
Adaptor for atomizing air hose |
|
05001166 |
Guide, wire coaxial cable, 14 GA, 11 GA |
|
05000313 |
Motor speed circuit board, PF400R |
|
05000352 |
Guide, control, 14 GA, 11 GA, console |
|
05000630 |
Gear, spur, insulated |
|
05004604 |
Gun head only |
|
05004737 |
Fanspray air cap for 1/16 in. and 2 mm wire |
|
05004993 |
Fanspray air cap for 11 GA wire |
|
05004738 |
Clamp ring for fanspray kit assembly |
|
05004734 |
Air cap for high velocity |
|
05002656 |
Standard nozzle (for extension gun) |
|
05000824 |
11 GA nozzle (for extension gun) |
HVOF -
TAFA Model 5220
|
P/N |
Barrels |
|
600480 |
Barrel with O-ring, 2.5 in. |
600460 |
Barrel with O-ring, 4 in. |
|
600461 |
Barrel with O-ring, 6 in. |
|
600462 |
Barrel with O-ring, 8 in. |
|
600463 |
Barrel with O-ring, 12 in. |
|
P/N |
Coaxial Stabilizer |
|
600392 |
Coaxial stabilizer assembly |
210539 |
Elbow tube, 1/8 in. (replaces 620178) |
|
230013 |
O-ring, coaxial tube, rear |
|
230248 |
O-ring, coaxial tube, front |
|
410113 |
Check valve, fuel for coaxial stabilizer |
|
450165 |
Check valve, oxygen for coaxial stabilizer |
|
450875 |
Electrode |
|
600408 |
Spark plug assembly |
|
600464 |
Coaxial tube assembly |
|
P/N |
Spares (5220) |
|
210042 |
Ferrule, 1/4 in. plastic |
210077 |
Nipple, fuel check valve |
|
210081 |
Nipple, oxygen check valve |
|
210364 |
Nut, 1/4 in. tubing |
|
230209 |
O-ring, combustion chamber |
|
230211 |
O-ring, barrel, back |
|
230261 |
O-ring, barrel, front |
|
450648 |
Mounting plate |
|
450922 |
Interconnector |
|
450924 |
Combustion chamber |
|
450925 |
Powder feed tube |
|
451163 |
Powder feed tube Insert, long life |
|
451832 |
Combustion pressure fitting (replaces p/n 450392) |
|
600359 |
Gun mount |
|
600418 |
Tool kit |
|
600512 |
Spare parts package, 500-hour |
|
600513 |
Spare parts package, 1,000-hour |
|
600628 |
Combustion pressure heat tube assembly |
|
620180 |
Powder port fitting |
|
800250 |
Remote pendant, for 5120, 25 ft. |
|
800437 |
Remote pendant for 5120, 50 ft. |
Plasma Spray -
TAFA Models SG-100 / SG-200 / 2086A / 2700
|
P/N |
Anodes |
|
02083-730 |
Anode, NVS, standard, for SG-100 |
03083-145 |
Anode, subsonic, 10 degree, 0.125 in., for SG-100 |
|
03083-165 |
Anode, subsonic, 10 degree, 0.078 in., for SG-100 |
|
03083-175 |
Anode, subsonic, 90 degree, 0.078 in., for SG-100 |
|
02083-355 |
Anode, Mach I, 10 degree, 0.125 in., for SG-100 |
|
02083-358 |
Anode, Mach I, 90 degree, 0.78 in., for SG-100 |
|
02083-155 |
Anode, Mach I, 10 degree, 0.78 in, for SG-100 |
|
02083-100 |
Anode, Mach II, 10 degree, 0.96 in., for SG-100 |
|
01230A-400 |
Anode for SG-200 |
|
02084-F45 |
Anode, standard, 45 degree, for 2086A |
|
02084-F60 |
Anode, 60 degree, for 2086A |
|
02700-200 |
Anode, standard, 45 degree, for 2700 |
|
02700-203 |
Anode, straight, for 2700 |
|
P/N |
Cathodes |
|
01083A-720 |
Cathode, standard, NVS for SG-100 |
03083-129 |
Cathode, subsonic, for SG-100 |
|
01083A-112 |
Cathode, Mach I, for SG-100 |
|
01083A-104 |
Cathode, Mach II, for SG-100 |
|
01230A-401 |
Cathode, for SG-200 |
|
03083-129 |
Cathode, for 2086A |
|
01068-ROO |
Cathode, for 2700 |
P/N |
Gas Injectors |
|
|
03083-112 |
Gas injector, standard, NVS, for SG-100 |
03083-113 |
Gas injector, subsonic/Mach I, for SG-100 |
|
03083-110 |
Gas injector, subsonic/Mach II, for SG-100 |
|
01230A-402 |
Gas injector, for SG-200 |
|
02084B-103 |
Gas injector, for 2086A |
|
02700A-120-1 |
Gas injector, front, for 2700 |
|
02700A-120-2 |
Gas injector, rear, for 2700 |
P/N |
Gun Housings |
|
|
01083A-122N |
Housing, middle, for SG-100, 2086A, 2700 |
01083B-200 |
Housing, front, for SG-100, 2086A, 2700 |
|
01083B-2051 |
Housing, rear, for SG-100, 2086A, 2700 |
|
01230A-400 |
Housing, front, for SG-200 |
|
01230A-401 |
Housing, middle, for SG-200 |
|
01230A-402 |
Housing, rear, for SG-200 |
|
P/N |
Spares |
|
01083-10 |
Tube, arc gas port, for SG-100, 2086A, and 2700 |
01083A-107A |
Plug, powder port, for SG-100, 2086A, and 2700 |
|
01083A-108 |
Cathode holder, for SG-100, 2086A, and 2700 |
|
02083-123 |
Plate, front cover, for SG-100 |
|
05004376 |
Adapter, cable, for SG-100 |
|
05004378 |
Tube, powder tube, for SG-100 |
|
02084-77 |
Tube, divider, for 2086A |
|
02084-80 |
Ring, locking, for 2086A |
|
02084-81 |
Plate, front cover, for 2086A |
|
02084-82 |
Collar, locking, for 2086A |
|
02084A-74 |
Tube, outside, for 2086A (specify length) |
|
02084A-75 |
Tube, divider, PVC, for 2086A (specify length) |
|
02084A-76 |
Cathode holder, for 2086A (specify length) |
|
0284A-83 |
Tube, powder assembly, for 2086A (specify length) |
|
02084A-85 |
Tube air assembly 45 degree, for 2086A (specify length) |
|
02084B-100 |
Gun housing middle insulator, for 2086A |
|
02084B-101 |
Water divider, outlet, for 2086A |
|
02084B-102 |
Gas distributor, for 2086A |
|
02700-004 |
Cathode holder , for 2700 (specify length) |
|
02700-005 |
Tube, assembly, powder, for 2700 (specify length) |
|
02700-101 |
Tube, outer, for 2700 (specify length) |
|
02700-102 |
Tube, water, for 2700 (specify length) |
Other -
TAFA Model 1264 Powder Feeder
P/N |
Spares 1264 |
|
|
01250-106 |
Surface ring |
01251-113 |
Kit, ring felt |
|
01250-108 |
Ring, back-up |
|
01250-308 |
Pad, felt |
|
01250-114 |
Ring, felt |
|
01224A-107 |
Ring, barrier (felt) |
|
015910 |
Ring, wiper |
|
01251-102 |
Kit, O-ring |
|
01250-107 |
Sleeve, powder out |
|
01250-224 |
Cam, lifter |
|
01253-108 |
Ring, back-up, high volume |
|
01252-111 |
Kit, repair, solenoid, valve |
|
01253-106 |
Ring, surface, high volume |
|
01253-114 |
Ring, felt, high volume |
|
012010 |
Bearing, double row ball |
|
05002289 |
Washer, cupped spring curve |
|
014030 |
Valve, pressure relief, 90 PSI |
|
01250-233 |
Tamper bar, anodized |
|
05005028 |
Power cable |
|
610312-12 |
Interface cable, 12 ft., 5120 to 1264 |
|
05005293-20 |
Control cable, 20 ft., 3710 to 1264 |
|
05005360-20 |
Control cable, 20 ft., 3620 to 1264 |
|
05003767 |
Tubing, clear, for 1264 |
|
220021 |
Tubing, 1/4 in., air to console, console to 1264 |
Powder Feeder Wheels
P/N |
POWDER FEEDER WHEELS |
|
![]() |
01250-109 |
Powder feeder wheel, standard |
05008643 |
Powder feeder wheel, 120-hole |
|
01250-141 |
Powder feeder wheel, for fine coatings |
|
01253-109 |
High volume, for coarse coatings |
|
451760 |
Powder feeder wheel, 240-hole |